Test for knowledge of the driver

Prior to getting any type of license within Alberta You will have take a driver's test.

Look through pages of:

  • Driver licensing reforms
  • How to get your license
  • Test of knowledge
  • Road road test
  • Learner's license for Class 7
  • Class 5 driver's license
  • Motorcycle driver's license Class 6.
  • Commercial license
  • Exchange an authorization from the outside of Alberta

Overview

Knowledge tests test your knowledge about Alberta's traffic law.

Knowledge tests are conducted by us for:

  • every driver's licence class all driver's licence classes, with the exception of Class 5 since the test for knowledge during the process of obtaining one's Class 5 licence is the knowledge test for Class 7 (learner's license)
  • The air brake endorsement
  • The S-endorsement
  • for the Safety Fitness Certificate (SFC) the test for compliance

Tests for knowledge are offered in the offices of registry agents at a cost:

  • The test consists of 30 multiple-choice questions. you need to score a minimum of 25 in order to pass.
  • The test can be taken at any number of times you need to pass, but you can only take it once every day.
  • It is mandatory to pay for every test.

Languages

Class 7 Test Class 7 Test is available at the test centers with audio assist devices, which can read the questions as well as the responses. If you are struggling in English and only require minimal assistance then you may use an actual paper English translation dictionary to pass the knowledge test of 7.

The 7th grade test is available in 25 languages: The 7 test is offered in 25 different languages:

  • Amharic
  • Arabic (Modern Standard)
  • Chinese (Simplified)
  • Italian
  • Korean
  • Oromo
  • Polish
  • Portuguese
  • Vietnamese
  • Chinese (Traditional)
  • Cree
  • Dutch
  • English
  • Punjabi
  • Russian
  • Somali
  • Spanish
  • Farsi
  • French
  • German
  • Hindi
  • Thai
  • Ukrainian
  • Urdu
  • Tagalog

If you wish to be able to pass the test in a different language that those mentioned above, you'll have to hire an approved translator. The test takes place in your own home. expenses and schedules for knowledge tests and the translation service (if required).

Class 1,2 3, 4 as well as air brake knowledge tests are only available and passed in English. If you are struggling in English and only require some assistance then you may utilize a printed English translation dictionary to prepare for the Class 3 or 6, (same same as class 7).

Ask a translator to take an examination of your knowledge

Before you can request a translator to take an Class 7 driver test that is in one of the above languages You must pass three Class 7 driver test questions by combining any combination of these:

  • English audio
  • English supported
  • Driver Knowledge Testing System in English
  • Driver Knowledge Testing System in any of the languages mentioned above

If you've passed at least 3 class 7 driver tests You can ask for an interpreter by emailing [email protectedat . When you email us, include the following details:

  • the full legal name
  • the exact date of birth
  • Current address for mailing
  • Contact email address
  • The language for translation required

If you decide to let another person provide your email address for you for you You are giving us permission to share your personal information to the email address you provide.

Contact People Driving Academy Inc.:

Address

5850 88 Ave NE #6190, Calgary, AB T3J 0Z7

Phone

+1 (403) 612-0040

Hours of operation

Monday 9 a.m.–5 p.m.
Tuesday 9 a.m.–5 p.m.
<> Wednesday 9 a.m.–5 p.m.
Thursday 9 a.m.–5 p.m.
Friday 9 a.m.–5 p.m.
Saturday 9 a.m.–5 p.m.
Sunday Closed

Map

When the particular language that you need cannot be translated via computers (see the table above under the section on Languages) it is not necessary to require a first try to pass the driver's knowledge test three times. It is possible to arrange for a professional translator to the correct translation identification number (TIN) to take the test together when you take your first test. If you already have the translator that has an active TIN and you are not required to reach us for assistance on this issue. We are able to grant or decline the request for the services of a translator, and inform that decision to you by an email. If you are approved, you'll be provided with a list of accepted translators. It is possible to choose any translator who has an TIN that is valid during the time of your test.

Check out the list of accepted translation agencies, as well as information about how you can become a driver's translator to pass the test.

Related

Knowledge test for air brakes in Calgary

 

The test has 10 questions.

 

The exam prior to. Therefore, you cannot begin it all over again.

Quiz is loaded.

Sign into your account or register for the quiz to begin.

It is necessary to complete the following test, in order to begin the test

Results

One of the 10 questions was completed correctly

Time has elapsed

The score is 0 out of 0 points. ( zero )

Categories

  1. Not classified as 0 percent

Sorry that you did not pass the exam! Go Back To All Tests Congratulations! The test was passed. Go Back To All Tests

  1. Answered
  2. Review

Question 1 of 10

1 . Question

In the past, before checking and setting the brakes?

  • Air pressure in the system is 60 psi.
  • Wheels must be blockage
  • The spring brakes need to be used
  • The system air pressure should range between 20 and 45 psi.

Question 2 of 10

2 . Question

What is the total distance to stop?

  • Distance to braking total and lat distance
  • Total reaction distance, brake lag distance and braking distance.
  • Total brake lag and reaction distance.
  • Time that it takes to stop the conditions of a slippery roadway

Question 3 of 10

3 . Question

What are the foundation brakes?

  • The mechanical component of the brake assembly.
  • The brakes in tour buses
  • The brakes that are used in hydraulic brake systems
  • The valves to reduce the lag

Question 4 of 10

4 . Question

What should be the significant event in the event that the safety valve malfunctions?

  • The compressor's filter could be blocked
  • One-way check valves could be defective
  • The valve for quick release is shut off
  • It could be that the governor is defective.

Question 5 of 10

5 . Question

What is the RPM at which the engine calibrated when carrying out the pre-trip air check?

  • 600 RPM to 900 RPM
  • 1500 RPM to 2000 RPM
  • 1000 RPM to 1300 RPM
  • 800 RPM to 1400 RPM

Question 6 of 10

6 . Question

Correct air brake adjustment for vehicles with brakes on the foundation is determined by?

  • The dimensions of the brake chamber
  • It is the length that adjusters for slack
  • The thickness of the brake liner
  • The rod that pushes the brake chamber moves

Question 7 of 10

7 . Question

The reason for making an entire brake application while having the engine off to?

  • Verify the functionality of the valve that prevents compounding
  • Verify the cut-in pressure of the governor.
  • Verify the safety relay valve
  • Make sure that any major leaks are absent from the system.

Question 8 of 10

8 . Question

What are the procedure for having the brakes tested to determine if they're working correctly?

  • In back roads, far from the other vehicles
  • Press the brake pedal, then look at the gauges
  • Slowly drive when you first enter the traffic
  • Slowly move forward, then press the brakes.

Question 9 of 10

9 . Question

The brakes need to be changed at what time?

  • The low air alarm buzzer are activated when the application is fully loaded.
  • The reservoir falls by over 12 psi during a complete application
  • A prior inspection of the rod indicates the rod travel is over permissible limitations.
  • The governor positions the compressor into the unload stage.

Question 10 of 10

10 . Question

An application air gauge indicates?

  • The primary pressure system.
  • The pressure of the tank is high.
  • The estimated pressure inside the chamber for brakes
  • The pressure inside the valve to prevent compounding
Popular Courses
  • Class 1 Tractor Trailer
  • Class 2 (Buses)
  • Air Brake Training
  • Class 3 (Straight Truck with Tandem Rear Axles)
  • Class 4 (Small Bus, Taxi, Limousine)
Popular Articles
  • Navigation, Truck Driving & Professionalism
  • Top 10 Tips for Better Fuel Mileage
  • Attaching the semi-trailer
  • Unhooking an untrailer semi
  • Twelve rules that will keep you moving – rules for trucking

CROSSROADS Students are asked to follow this hyperlink to CROSSROADS's web site.

MEMBERSHIPS

A MEMBER SINCE 1992

A MEMBER SINCE 1999

SPONSORSHIPS

SAANICH HISTORICAL ARTIFACTS SOCIETY

CENTRAL SAANICH LIONS CLUB

REYNOLDS HIGH SCHOOL

BEV LASHMAN MEMORIAL GOLF TOURNAMENT

Copyright (c) 2024 CSTT Complete School of Truck Transportation. All rights are reserved.

Leave a Reply

Your email address will not be published. Required fields are marked *